What do you use to turn on your lights

Home › Forums › General Marine Keeping Discussion › Systems and Equipment › What do you use to turn on your lights

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 11, 2019 at 1:54 pm #5548
    elfredanellyparkerelfredanellyparker
    Participant

    What do you use to turn on your lights.
    the reason i ask is the timers i use are crap!!
    they turn off when they want and loses time
    any ideas

    February 11, 2019 at 2:31 pm #5561
    Avatarappealing.elfreda
    Participant

    I made one some time ago don-t use it anymore but it was made from 1.5 inch waste pipe and a couple of modified bubble up corner filters, it worked quite well. Only problem was small bubbles entering the U tube and eventually causing an air block.

    HTH – good luck

    I would fit a level switch on the sump return pump though – just in case

    January 12, 2021 at 12:16 pm #6867
    AvatarShelaghM
    Participant

    I gave the Redsea LEDs so just set it up as I wanted and it dies the rest.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.